Restom®KPM 6000 Complete Kit

Reference RE103301

Read reviews (0)

The Restom®KPM 6000 Complete Kit consists of Restom KPM 6000 THT (resistance up to 550°C) in 0.25 L, Restom KPM 6000 BASE (with hardener; resistance up to 180°C) in 600 g and Restom DILUANT 5020 in 0.5 L. It is available in black or aluminium grey. For use on air-cooled engines.

The amount of paint contained in the kit is sufficient to treat a 4-cylinder engine of 1000/1200 cm3.

Description

Compatible with

Technical sheet

Reviews 0

The Restom®KPM 6000 Kit consists of Restom KPM 6000 THT (resistance up to 550°C) in 0.25 L, Restom KPM 6000 BASE (with hardener; resistance up to 180°C) in 600 g and Restom DILUANT 5020 in 0.5 L. The use of other thinners is strongly discouraged.

The kit is available in black or aluminium grey and is intended for the renovation of aluminium or light alloy motorbike engines. For a better result, it is recommended to apply the products with a spray gun according to the instructions provided with the kit.

The paint dries in the open air for two days or one hour at 60°C, leaving the engine idling. Once this time has elapsed, the paints are neither yellowing nor sensitive to oil or petrol and have a high resistance to abrasion (rubbing boots, etc.).

To clean your equipment, we advise you to use Restom DILUANT 5020 and acetone.
We invite you to consult the various precautions for use before handling the products. Do not hesitate to contact us if you have any further questions.