Motoscope PRO digital meter Motogadget

The motoscope pro is the latest digital dashboard generation from motogadget.

Cutting edge technology makes an ultra-flat housing design possible. 734 LEDs, controlled by a 16bit Risc processor, form the almost fully self-illuminating display matrix. It ensures optimal readability - even in direct sunlight. An analogue LED band with drag pointer function displays the speed in a freely scalable manner.

The main and secondary displays can be configured by the user. Another display area shows the gear engaged.

Four indicator lights are already integrated and can be used for many more input signals with the help of the display. For the connection of the indicator lights and/or the measuring inputs, Breakout Box A or B is additionally required. See above tab 'Breakout Boxes'.

The motoscope pro has a complete CAN bus interface and is thus prepared for many future developments of Plug 'n Ride solutions. The dashboard communicates via its own digital single-wire bus (m-BUS) with additional breakout boxes that easily extend the range of functions.

Thus, the dashboard is extremely versatile and can be adapted to very many vehicles and applications.

The aluminium housing is milled from the solid, anodised and can be easily fixed by two threaded bushings on the back. The instrument has an ABE and does not need to be registered.

Please order the Breakout Box for connecting indicator lights (see Breakout Box Std.) or to digital bus systems (Triumph, H-D) additionally. No breakout box is required for BMW R9T.
 

Scope of delivery

    Instrument with approx. 70 cm connection cable
    Speedometer sensor M5 x 0.5 fine thread (stainless steel, IP67) with approx. 150 cm connection cable
    2 magnets
    Push button mini
    10 cable end connectors
    flying fuse
    2 stainless steel fixing screws
    detailed mounting and operating instructions


Attention: Touch sensor is no longer included. A small mini-button is included in the scope of delivery

 

Specifications and features

Length/width/depth 109 mm/ 47 mm/ 11 mm
Weight with cable approx. 100 g
Mounting 2 x M3 threaded socket
Current consumption in operation approx. 200 mA (load-dependent)
Power consumption in idle state 0.4 mA
Operating voltage 9 V - 15 V
Operating temperature -20°... +80°C
Tachometer (LED band)
    0 - 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)
Speedometer
    0 - 350 km/h o. mph
Trip meter A
    up to 999.9 km or mi
Trip meter A
    up to 999.9 km or mi
Total kilometres (adjustable) up to 250000 km or mi
Operating hours counter/service 0 - 9999.5 h
Clock 23:59 h/min
Driving time display 0 - 99:59:59 h/min/s
Rev counter (on LCD) 0 - 20000 rpm
Adjustable rev warning (shift flash) 0 - 20000 rpm
On-board voltage indicator 9 - 18 V
Low voltage warning Warning when below approx. 11V
Time measurement 0 - 100 km/h o. 0 - 60 mph 0.00 - 30.59 sec.
instantaneous acceleration +/- 0.00 - 1.50 G
Average speed 0 - 350 km/h o. mph
Maximum speed 0 - 350 km/h o. mph
max. speed 0 - 20000 rpm
max. positive acceleration +1.50 G
max. negative acceleration - 1.50 G
Gear indicator N, gear 1 - 6
Green control LED (with breakout box A/B) Neutral (N)
Green control LED (with breakout box A/B) Indicator left, right
Blue control LED (with breakout box A/B) High beam
Red warning LED (with breakout box A/B) Various warning functions
fuel/reserve (with breakout box A/B) 0 - 100% with low warning
Air temperature* (with breakout box B) -20 - 80 °C / -4 - 176 °F with high/low warning
Water temperature* (with breakout box B) 40 - 120 °C / 104 - 248 °F with High/Low warning
Oil temperature* (with breakout box B) 40 - 150 °C / 104 - 302 °F with high/low warning
Oil pressure* (with breakout box B) 0.5 - 8 bar / 0 - 116 psi with high/low warning