Digital Speedometer Motoscope Mini Motogadget

The Motoscope Mini Motogadget is an extremely small digital motorbike computer. The 251 ultra-bright LEDs form an easy-to-read display area that uses the full size of the screen. It fits most two, three or four-wheeled vehicles with its simple, elegant design reflecting its quality.

Motoscope Mini display & function

The 251 ultra-bright LEDs make the screen virtually borderless.

For optimum readability in darkness, sunlight and twilight, the brightness of the LEDs is automatically adjusted. For the speed limit range (‘red zone’) or as a switching light function, you can enter a speed value which, if exceeded, causes all the LEDs to light up simultaneously.

The Moto Vision Team's trick: the Motoscope Mini Motogadget's display can show figures not only from left to right, but also from top to bottom. As a result, the instrument can also be displayed vertically!

Managing the display

To switch from one display to another, use the menu button, for example, the button on the handlebar. The standard default display is speed. If required, other measured values can be displayed by briefly pressing a button. As an option, you can configure the display to return automatically to the speed value after a short time, or to a specific fixed display.

Of course, the default settings and stored values are saved even if there is no power supply.

Meter mounting

Thanks to its very small dimensions, the Motoscope Mini Motogadget can be easily fitted to almost any vehicle. Free-standing on the fork crown or handlebars, in existing dashboards or integrated into tanks or fibreglass - the instrument can be mounted almost anywhere on your motorbike.

We offer a range of compatible universal mounting brackets, as well as specific solutions for certain motorbike models such as Buell (TM) or Harley-Davidson (TM).

Connection and sensors

The simple wiring and detailed installation instructions make it easy to connect the speedo to your bike, even for riders new to electrical accessories.

The included stainless steel speedometer sensor is very small (M5 / 25 mm). With its 1.5 m connection cable, it can be easily attached to the front or rear wheel. What's more, vehicles with an original mechanical speedometer reader can easily be converted.

The Motoscope Mini Motogadget is compatible with many OEM speedometer sensors (reed contact and proximity sensors). In this case, only the connections are connected and the mechanical installation of a sensor is unnecessary. An ‘intelligent learning function’ makes it easy to calibrate the speedometer, even on vehicles fitted with gearbox sensors.

Scope of delivery

The Motoscope Mini Motogadget digital meter comes with the following items:

    Speedometer with approx. 55 cm connecting cable
    Speedometer sensor (M5 x 0.5 fine thread, stainless steel, IP 68) with 150 cm connecting cable
    Fuses
    Speed sensor with 150 cm connection cable
    2 x magnets
    Mini push-button
    QR code for installation and operating instructions

Specifications and features of the Motoscope Mini digital speedometer

    Length 59 mm / width 21.5 mm / depth / 13 mm
    Weight approx. 32 g
    Mounting 2 M3 threaded sockets
    Current consumption during operation approx. 100 mA
    Idle current consumption 0 mA
    Operating voltage 7V - 18V
    Operating temperature -20 ° ... + 80 ° C
    Tachometer (LED bar) 0 - 6/8/10/14/16 krpm
    Tachometer (digital) 0 - 20 krpm
    Limit range setting / offset flashes 0 - 20 000 rpm
    Speedometer 0 - 999 km / h or mph
    Odometer 0 - 999.99 km or mi
    Total kilometres (adjustable) up to 99,999 km or mi
    Trip time display 0 - 99:59 h / min