Select your motorbike
Your bike
-35%
MOTUL RBF 600 FACTORY LINE DOT 4 RACING BRAKE FLUID SYNTHETIC 500 ML
Reference DP016 X6
MOTUL Racing Brake Fluid (RBF 600) is a 100% synthetic brake fluid designed for all hydraulic brake and clutch control systems for which a silicone-free synthetic fluid - DOT 4 - is recommended.
Specially designed to withstand the very high temperatures of hydraulic controls for racing brakes (steel or carbon) and clutches. This oil is also suitable for conventional brakes with steel discs and for hydraulic clutch controls. Exceeds DOT 3 and DOT 5.1 standards, except for viscosity at -40°C / -40°F. Very high boiling point: 312°C / 594°F.
Packaging : 6X 500 ml can
93,48 € incl. VAT
Content of the pack
(1 articles)Available [25 in stock] | Shipped today , expected delivery date 11/25/24
Discover high performance brake fluid for motorbikes, a 100% Synthetic - DOT 4 fluid designed for all brake and clutch controls where a silicone-free synthetic fluid is recommended. Specially designed to withstand the very high temperatures of hydraulic controls for racing brakes (steel or carbon) and clutches, with a very high boiling point: 312°C / 594°F.
Also exceeds DOT 3 and DOT 5.1 standards, except for viscosity at -40°C / -40°F.
MOTUL RBF 600 performance
STANDARDS : FMVSS 116 DOT 4 / SAE J 1703 / ISO 4925 (5.1, 4 & 3)
Extremely high thermal resistance and stability: The very high boiling point (312°C / 594°F), which is higher than conventional DOT 5.1 / DOT 5 (260°C / 500°F min) and DOT 4 (230°C / 446°F min) fluids, means that braking efficiency is maintained even when the brakes are under extreme stress.
Effectiveness in wet weather: The very high wet boiling point (205°C / 401°F), which is higher than conventional DOT 5.1 non-silicone base fluids (180°C / 356°F min) and DOT 4 (155°C / 311°F min), means that braking effectiveness is maintained in wet weather. DOT 3, DOT 4 and DOT 5.1 brake fluids have the property of absorbing moisture from the air, which lowers the boiling point and increases the risk of ‘vapor lock’.
The wet boiling point is measured after moistening the product with approximately 3.5% water.
Directions for use MOTUL RBF 600 - High performance brake fluid for motorbikes
Avoid mixing with lower performance polyglycol based brake fluids. Do not mix with mineral (LHM) and silicone (DOT 5 silicone base) based fluids. Chemical product aggressive to hands, paints and varnishes.
In the event of skin contact, rinse thoroughly.
Properties of Motul high performance brake fluid for motorbikes
Colour (Visual) : Amber
Viscosity at 100°C (212°F): 2.5 mm²/s
Viscosity at -40°C (-40°F): 1,750.0 mm²/s
Dry boiling point: 312.0°C / 594.0°F
Wet boiling point: 204.0 °C / 399.0 °F
This product is universal
| Reference | DP016 X6 |
| Manufacturer | Motul |
| Capacity | 500ml |
