Muc-Off ceramic protection kit

With its innovative formula, this Muc-Off ceramic protection kit provides long-lasting protection against scratches (9H resistance), UV rays, water stains, dust and external aggression. It creates a hydrophobic barrier that repels water (repelling liquids with a water contact angle of between 100° and 110°) and makes your surfaces easier to maintain.

It can be used on paintwork, carbon fibre, metal components, wheels, vinyl and rigid plastic trim on bicycles, electric bikes, motorbikes, cars, ATVs and much more.

Durable and easy to apply, the Muc-Off ceramic protection kit prolongs the life and shine of your two-wheeled vehicles. To ensure optimum results, follow these steps:

- Thorough cleaning: Wash your bike or motorbike thoroughly using specific products such as Nano Tech Bike Cleaner or Punk Powder. Make sure the surfaces are completely dry before applying the coating.
- Correct defects: If necessary, remove imperfections such as scratches or water spots to maintain a perfect finish.
- Degreasing: Use the included surface preparation spray to remove all residues (paint correction or wax/polish) before applying the coating. Simply spray onto the microfibre cloth and wipe dry.

How to use the Muc-Off ceramic protection kit

Apply the coating in a cool, dry and clean place, indoors, with good lighting and ventilation. It is advisable to wear protective gloves when applying the coating. For non-machined finishes, test a small, inconspicuous area before applying the entire coating. Application is simple but requires precision and care:

1- Shake the bottle thoroughly for 10 seconds to activate the formula.

2- Unscrew the child-resistant cap, then apply the coating sparingly and evenly using the microbead applicator pad supplied. (A little coating is all you need).

3- Starting with the highest surfaces, work in cross-hatch patterns, overlapping to ensure all areas are covered. We recommend limiting application areas to the approximate size of a bicycle tube/panel at a time. Relax and take your time, applying slowly and carefully to get the best results.

4- Add more coating to the applicator pad when the coating is not applied evenly or the applicator does not glide smoothly over the surface.

5- Leave the wet coating to harden for 5 minutes. During this time, the coated surface will take on the appearance of a rainbow. During this time, check that you have covered all the areas. Using the microfibre cloth supplied, lightly polish the surface in small circular movements until it is very shiny and mirror-like. Be sure to check the surface under several angles of light to ensure that all rainbow effects have been removed. Do not leave the wet coating to harden for more than 5 minutes and make sure that it has been completely removed by polishing.

6- After sanding, allow the coating to harden completely for 24 hours in a cool, dry place before exposing it to water or the elements. (For best results and adhesion, we advise against washing for at least 48 hours after application).

7- You can easily apply a second coat of coating for even longer durability, simply follow the cost application instructions above after the first coat has fully cured. No further preparation is required.

The Muc-Off ceramic protection kit should be used within 6 months of opening.

How do you maintain your cover?

To maintain your ceramic coating correctly, we recommend that you only clean it with our Nano Tech Bike Cleaner, Punk Powder or Snow Foam. Avoid using other solvents or acid cleaners, as they break down the coating much more quickly. Keeping the surface clean will preserve the hydrophobic properties of the coating.

If you notice that the surface is starting to lose its hydrophobic properties over time, simply apply an extra coat to refresh the coating. We recommend topping up every 6 months to maintain optimum performance.