Select your motorbike
Your bike
Emission suppression plate KAWASAKI H2 - H2R - H2 SX - Z H2 - Z 800 - 900 - 1000 - ZX10R - ZX6R YAMAHA R6 - XJ6 - FZ6
Reference PLE-104
SmartMoto KAWASAKI H2 - H2R - H2 SX - Z H2 - Z 800 - 900 - 1000 - ZX10R - ZX6R YAMAHA R6 - XJ6 - FZ6 anti-pollution removal plate, allowing complete dismantling of your motorbike's original anti-pollution system and all associated parts.
This kit is intended for closed-course competition only.
49,00 € incl. VAT
Key features of the KAWASAKI H2 - H2R - H2 SX - Z H2 - Z 800 - 900 - 1000 - ZX10R - ZX6R YAMAHA R6 - XJ6 - FZ6 emission suppressor plate:
Eliminates exhaust noise on deceleration and backfire typically associated with exhaust systems.
Provides a true A/F ratio for fuel tuning. A/F ratio measurements are reliable
Frees up engine space
Can improve throttle response, resulting in more power, with the engine running better at lower revs, depending on the motorbike.
This kit allows you to completely remove the emission control system from your motorbike if it is specified in the compatible models. The installation of this kit is intended for closed circuit competition only. By purchasing this anti-pollution removal kit, you acknowledge that it is not intended for use on public roads.
Why install an anti-pollution suppression kit on your motorbike?
In order to comply with anti-pollution regulations, manufacturers must now fit vehicles with a catalytic converter and ensure that a precise balance is maintained between the air and petrol emitted by the exhaust system. Your motorbike is therefore fitted as standard with an anti-pollution system called PAIR on Kawasaki models, AIS on Yamaha models, SAS on KTM models and CLEAN SYSTEM on the rest of the motorbike models.
This system routes fresh air from the airbox to the exhaust system to help burn unburnt fuel in the exhaust. It is designed to improve emissions on original exhaust systems, but can cause exhaust noise and backfire when retrofitting exhaust systems.
The SmartMoto emission suppression kit is made up of CNC machined parts (the blanking plates), combined with SmartMoto complete kits that provide all the components you need to eliminate the secondary air system.
If you need advice on how to fit your SmartMoto kit, go to:
https://smartmoto-electronics.com/installation-pair-ais-valve-eliminator-kit-complete-en
This product is comptable with:
| KAWASAKI | NINJA 1000 SX | 2020 => 2024+ |
| KAWASAKI | NINJA H2 | 2015 => 2021 |
| KAWASAKI | NINJA H2 SX SE | 2022 => 2024+ |
| KAWASAKI | Ninja H2 R | 2015 => 2024+ |
| KAWASAKI | VERSYS 1000 | 2012 => 2014 |
| KAWASAKI | VERSYS 1000 | 2015 => 2018 |
| KAWASAKI | VERSYS 1000 | 2019 => 2020 |
| KAWASAKI | VERSYS 1000 | 2021 => 2024+ |
| KAWASAKI | Z 750 | 2007 => 2013 |
| KAWASAKI | Z 800 | 2013 => 2016 |
| KAWASAKI | Z 900 | 2017 => 2019 |
| KAWASAKI | Z 900 | 2020 => 2024+ |
| KAWASAKI | Z 900 RS | 2018 => 2024+ |
| KAWASAKI | Z 1000 | 2007 => 2009 |
| KAWASAKI | Z 1000 | 2010 => 2013 |
| KAWASAKI | Z 1000 | 2014 => 2020 |
| KAWASAKI | Z H2 | 2020 => 2024+ |
| KAWASAKI | ZX 6 R | 2007 => 2008 |
| KAWASAKI | ZX 6 R | 2024 => 2024+ |
| KAWASAKI | ZX 6R (version piste, non 636) | 2009 => 2017 |
| KAWASAKI | ZX 6 R 636 | 2013 => 2018 |
| KAWASAKI | ZX 6 R 636 | 2019 => 2020 |
| KAWASAKI | ZX 6 R 636 | 2024 => 2024+ |
| KAWASAKI | ZX 10 R | 2004 => 2005 |
| KAWASAKI | ZX 10 R | 2006 => 2007 |
| KAWASAKI | ZX 10 R | 2008 => 2010 |
| KAWASAKI | ZX 10 R | 2011 => 2015 |
| YAMAHA | FZ 6 | 2004 => 2006 |
| YAMAHA | FZ 6 | 2007 => 2008 |
| YAMAHA | XJ 6 600 DIVERSION | 2009 => 2016 |
| YAMAHA | YZF-R6 | 2006 => 2007 |
| YAMAHA | YZF-R6 | 2008 => 2009 |
| YAMAHA | YZF-R6 | 2010 => 2016 |
| YAMAHA | YZF-R6 | 2017 => 2024+ |
