Select your motorbike
Your bike
Motorcycle paint Triumph Jet Black 955 Sprint RS 2001-2003
Reference PG
Motorcycle paint based on water
High hiding power.
Ready to use, already diluted.
We create the colors directly in our laboratory according to your needs the color code that you want.
If you do not find your color do not hesitate to contact our team who can inform you at (0033)3-88-09-29-31
TECHNICAL DATABASE BASED ON WATER
Description: Tintometric system made with acrylic resins APEO free, designed for car refinishing, composed of 65 base colors: 35 opaque bases, 7 aluminum bases, 4 graphite, 15 nacres, 4 xirallic and 3 auxiliaries.
Mixing: Before using the different bases, shake to mix the product, especially the aluminum bases. Once weighed the individual components of the hue, mix immediately.
Always filter the product with a 125 micron filter.
Note: Prepare the support with dry abrasive paper P600 or with wet P1000 paper, then degrease with an anti-silicone degreaser.
Application :
HVLP gun - nozzle 1,3-1,4
Pressure: 2 / 2,5 bar
Operating temperature: not less than 18 ° C
Application of metallic and pearlescent hues
1. Apply an anchoring veil and allow to dry until completely opaque.2 Apply a second full coat (for non-covering colors apply a third coat). Between the two layers allow to dry until completely opaque.
3. Apply a final layer of metallization with the same pressure but increasing the distance between the gun and the support.
Note: To accelerate drying, it is advisable to use a venturi and to increase the temperature of application.
Applying opaque hues
1. Apply a first coat and allow to dry until completely opaque
2. Apply a second coat to achieve complete coverage. In the case of hints of poor coverage, apply a third coat.
Always wait for opacification between successive layers.
Note: To accelerate drying, it is advisable to use a venturi and to increase the temperature of application.
Drying at 20 ° C / 40% humidity, 5 min for the anchor layer and 10 min the second layer.
Sanding: To eliminate any surface defects, sand with dry abrasive P1000 or higher after complete drying of the paint and repeat the proper painting cycle.
Varnish: Min. Time for application of varnish 15 minutes, maximum time 72 hours
Conservation: all shades kept in good conditions can be used within 3 months of their preparation
Theoretical yield: 3-4m² / kg of PAE product
CAUTION: KEEP OUT OF FREEZE. Store at temperatures above 15 ° C.
art this day
This product is comptable with:
TRIUMPH | SPRINT 955 RS | 2000 => 2001 |
TRIUMPH | SPRINT 955 RS | 2002 => 2004 |
Reference | PG |
Manufacturer | Moto Vision |
Painting | Liquid paint |
Nature of the paint | Tri-Coat (undercoat/base coat/varnish) |
Related Products
Products in the same category
Available [100 in stock]
Available [100 in stock]
Available [90 in stock]
Available [97 in stock]
Available [100 in stock]
Available [99 in stock]
Available [100 in stock]
Available [100 in stock]
Available [100 in stock]
Available [100 in stock]