Select your motorbike
Your bike
Single arm stand MonoPro - axe 53,5 for BMW
Reference Mono-2-53,5
Workshop stand for Serie K and S, R nine T BMW models with a single-arm (left-hand grip) supplied with a 53.5 mm axle. With its more massive look, the B model is pre-assembled, its axle is longer and slightly inclined to catch up with the level of your motorbike.
⚠ Please note: other BMWs require a right-hand plug. The reference BEQ011-30.5 is then more suitable.
The support is suitable for motorbikes with a swingarm with a hollow axle. It provides a more secure hold for the vehicle.
IMPORTANT: Axle sizes vary according to motorbike model. If you have any doubts about the compatibility of the product with your vehicle, please specify the exact model of your motorbike on the home page of our site to filter your results. You can also check the size of axle required directly on your motorbike.
94,00 € incl. VAT
Content of the pack
(2 articles)Out of stock [0 in stock]
Available [17 in stock] | Shipped on 10/31/24. , expected delivery date 11/4/24
Please select an option
Available [41 in stock] Shipped on 10/30/24. , expected delivery date 11/1/24
Workshop stand for Serie K and S, R nine T BMW models with a single-arm (left-hand grip) supplied with a 53.5 mm axle. With its more massive look, the B model is pre-assembled, its axle is longer and slightly inclined to catch up with the level of your motorbike.
⚠ Please note: other BMWs require a right-hand plug. The reference BEQ011-30.5 is then more suitable.
The support is suitable for motorbikes with a swingarm with a hollow axle. It provides a more secure hold for the vehicle.
IMPORTANT: Axle sizes vary according to motorbike model. If you have any doubts about the compatibility of the product with your vehicle, please specify the exact model of your motorbike on the home page of our site to filter your results. You can also check the size of axle required directly on your motorbike.
Workshop stand for BMW, made from 45 mm diameter tubing, weighing 13 kg and spanning 55 cm, with 4 rigid PVC castors for perfect stability of your motorbike. The stand is assembled in one block and the wheels are already attached. No assembly required! Delivery includes a 53.5 mm diameter adapter mounted on 2 ball bearings specific to your single-arm axle.
A motorbike workshop stand is ideal for all your maintenance work, oil changes, wheel changes, chain lubrication, winter maintenance, etc.
This product is comptable with:
BMW | F 800 GS | 2008 => 2012 |
BMW | F 800 GS | 2013 => 2017 |
BMW | F 800 GS ADVENTURE | 2013 => 2017 |
BMW | F 800 GT | 2013 => 2020 |
BMW | F 800 S | 2006 => 2010 |
BMW | HP2 ENDURO | 2005 => 2007 |
BMW | HP2 SPORT | 2008 => 2010 |
BMW | K 1300 R | 2009 => 2015 |
BMW | K 1300 S | 2009 => 2015 |
BMW | NINE T RACER | 2017 => 2020 |
BMW | R 1200 GS | 2004 => 2007 |
BMW | R 1200 GS | 2008 => 2009 |
BMW | R 1200 GS | 2010 => 2012 |
BMW | R 1200 GS | 2013 => 2016 |
BMW | R 1200 GS ADVENTURE | 2006 => 2007 |
BMW | R 1200 GS ADVENTURE | 2008 => 2009 |
BMW | R 1200 GS ADVENTURE | 2010 => 2013 |
BMW | R 1200 GS ADVENTURE | 2014 => 2018 |
BMW | R 1200 R | 2007 => 2010 |
BMW | R 1200 R | 2011 => 2014 |
BMW | R 1200 R | 2015 => 2018 |
BMW | R 1200 RT | 2005 => 2009 |
BMW | R 1200 RT | 2010 => 2013 |
BMW | R 1200 S | 2006 => 2009 |
BMW | R 1200 ST | 2005 => 2007 |
BMW | R NINE T | 2014 => 2023 |
BMW | R NINE T Pure | 2017 => 2023 |
BMW | R NINE T Scrambler | 2017 => 2023 |
BMW | R NINE T Urban G/S | 2017 => 2023 |
Reference | Mono-2-53,5 |
Manufacturer | Joker Racing |
Position | Back |
Range | Steel |
Mounting Type | Monoarm |
Products in the same category
Available [5 in stock]
To order [0 in stock]
Available [2 in stock]
Available [4 in stock]
Available [3 in stock]
To order [0 in stock]
Available [2 in stock]
Available [4 in stock]
Available [4 in stock]
Available [1 in stock]