Select your motorbike

Motorcycle paint Aprilia Lion's Head Nero Coffee

Reference M2009

Water based paint (250 or 500ml) with formula made on site to order.

Your order may require up to 3 days of preparation to create a high quality acrylic paint for painting.

Advantages of our ready-to-use motorbike paints:

    Easy application with a professional quality sprayer, also suitable for large surfaces
    Extremely strong pigmentation and special additives guarantee a high covering power
    Coverage: + or -1 m².

The drying time depends on the ambient temperature, relative humidity and the thickness of the applied layer. With drying in normal conditions (at 20°C, 50% relative humidity): dust-free after 10 minutes, touch-dry after 30 minutes.

Voir la fiche complète
Description
Compatible with
Reviews 0

TECHNICAL DATABASE BASED ON WATER

Description: Tintometric system made with acrylic resins APEO free, designed for car refinishing, composed of 65 base colors: 35 opaque bases, 7 aluminum bases, 4 graphite, 15 nacres, 4 xirallic and 3 auxiliaries.

Mixing: Before using the different bases, shake to mix the product, especially the aluminum bases. Once weighed the individual components of the hue, mix immediately.

Always filter the product with a 125 micron filter.

Note: Prepare the support with dry abrasive paper P600 or with wet P1000 paper, then degrease with an anti-silicone degreaser.

Application :

HVLP gun - nozzle 1,3-1,4

Pressure: 2 / 2,5 bar

Operating temperature: not less than 18 ° C

Application of metallic and pearlescent hues

1. Apply an anchoring veil and allow to dry until completely opaque.2 Apply a second full coat (for non-covering colors apply a third coat). Between the two layers allow to dry until completely opaque.

3. Apply a final layer of metallization with the same pressure but increasing the distance between the gun and the support.

Note: To accelerate drying, it is advisable to use a venturi and to increase the temperature of application.

Applying opaque hues

1. Apply a first coat and allow to dry until completely opaque

2. Apply a second coat to achieve complete coverage. In the case of hints of poor coverage, apply a third coat.

Always wait for opacification between successive layers.

Note: To accelerate drying, it is advisable to use a venturi and to increase the temperature of application.

Drying at 20 ° C / 40% humidity, 5 min for the anchor layer and 10 min the second layer.

Sanding: To eliminate any surface defects, sand with dry abrasive P1000 or higher after complete drying of the paint and repeat the proper painting cycle.

Varnish: Min. Time for application of varnish 15 minutes, maximum time 72 hours

Conservation: all shades kept in good conditions can be used within 3 months of their preparation

Theoretical yield: 3-4m² / kg of PAE product

CAUTION: KEEP OUT OF FREEZE. Store at temperatures above 15 ° C.

art this day

This product is comptable with:

APRILIA RSV 1000 R 2004 => 2005
APRILIA RSV 1000 R 2006 => 2009

Subscribe to our newsletter

Don't miss any more promotions!