Select your motorbike
Your bike
-6%
Motoscope PRO digital meter Motogadget BMW R9T
Reference 1005031
The Motoscope Pro Motogadget is the latest generation digital meter that will allow you to fully customize the information displayed and the way it is displayed.
Its sleek design will fit any project and the separate accessories available will simplify the wiring and the combination with other Motogadget accessories.
403,26 € incl. VAT
To order [0 in stock] Average shipping time: 14 days after placing your order
Payment 3x available from 150€ of purchase
The motoscope pro BMW R9T is the only plug&ride instrument on the market.
The CAN bus interface of the motoscope pro allows the complete mapping of all original functions (except heated grip adjustment). The original connector to the wiring harness makes the instrument a real Plug&Ride solution. Just plug it in and go!
An LED matrix display makes an ultra-flat housing design possible. 734 individual LEDs, controlled by a 16bit Risc processor, form the self-luminous display. They ensure optimal readability - even in direct sunlight. Automatic brightness adjustment is a matter of course.
The speed is displayed via an analogue LED band with drag pointer function. The main and secondary displays can be configured by the user. Another display area shows the gear engaged. Four indicator lights are already integrated and can be used for many more input signals with the help of the display.
The aluminium housing is milled from the solid, anodised and can be easily fixed by two threaded bushes on the back. The instrument has an ABE and does not need to be registered.x
> Compatible with BMW R nineT model 2014, 2015, 2016
> NOT compatible with BMW R nineT model 2017 and later, R nineT Urban G/S, R nineT Pure, R nineT Racer, R nineT Scrambler.
Scope of delivery
motoscope pro with approx. 60 cm connection cable and plug for R9T
2 stainless steel fixing screws
Detailed mounting and operating instructions
Under the tab 'Mounting' you will find the matching bracket for the BMW R9T shown here.
Attention: Touch sensor is no longer included, heating grip control via instrument not possible.
Specifications and features
Length/width/depth 109 mm/ 47 mm/ 11 mm
Weight approx. 100 g
Mounting 2 x M3 threaded socket
Current consumption in operation approx. 200 mA (load-dependent)
Power consumption in idle state 0.4 mA
Operating voltage 9 V - 15 V
Operating temperature -20°... +80°C
Tachometer (LED band)
0 - 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)
Speedometer
0 - 350 km/h o. mph
Trip meter A
up to 999.9 km or mi
Trip meter B
up to 999.9 km or mi
Total kilometres (adjustable) up to 250000 km or mi
Hour meter/service 0 - 9999.5 h
Clock 23:59 h/min
Driving time display 0 - 99:59:59 h/min/s
Rev counter (on LCD) 0 - 20000 rpm
Adjustable rev warning (shift flash) 0 - 20000 rpm
On-board voltage indicator 9 - 18 V
Low voltage warning Warning when below approx. 11V
Time measurement 0 - 100 km/h o. 0 - 60 mph 0.00 - 30.59 sec.
instantaneous acceleration +/- 0.00 - 1.50 G
Average speed 0 - 350 km/h o. mph
Maximum speed 0 - 350 km/h o. mph
max. speed 0 - 20000 rpm
max. positive acceleration +1.50 G
max. negative acceleration - 1.50 G
Gear indicator N, gear 1 - 6
Green control LED idling (N)
green control LED indicator left, right
blue control LED high beam
red warning LED Warning functions for engine warning light / ABS/Low-Fuel
Petrol/reserve low-fuel warning light
Related Products
