Select your motorbike
Your bike
-10%
Shifter Up&Down IRC Components Plug&Play Ducati PANIGALE V4
Reference SGRACE_BLIP_PAN_V4_sUP
Enjoy the race with shift assist (up / down)
Designed by IRC components for the most demanding pilots, this Blipper will allow you to improve shifting electronically. Beyond the capabilities of a classic shifter that only helps you up your gears, the BLIPPER is designed to help you up and down your gears.
These parts are specific to each motorcycle, be sure to check the assignment before ordering.
Important: The blipper harness connects to the ignition coils and not the injectors!
756,00 € incl. VAT
Blipper IRC Componentsa
To save significant time in competition, the IRC Blippers allow you to reduce the time your rear wheel does not accelerate during gear change. When accelerating in a straight line, you will no longer have to lower your acceleration and engage in shifting gears, in either direction, then disengage before resuming acceleration. A handling that is certainly very fast, but which can make you lose precious seconds at the end of the stopwatch.
With this state-of-the-art equipment, you will only have to press the selector and stay focused on your run. Sensors will detect the change in pressure and take care of the micro-cut and the gear change. The Blippeur will do all the work.
If your motorcycle does not have an original shifter, a pressure sensor is supplied with it.
If your motorcycle is equipped with an original shifter, you will need to replace the sensor with the one supplied with the blipper.
If your motorcycle is equipped with a reverse rear set, it is necessary to control the length of the rod and take a suitable one; the brand of your rear set does not provide a suitable rod. Then, it is simply necessary to reverse the direction of operation of the sensor. All sensors are push and pull, the CE (compression / extension) parameter should be adjusted as needed.
The advantages of BLIPPER IRC Components:
- Plug & Play
- Notices available in several languages
- No need for PC or bench
- Can be connected to data acquisition systems.
- Clear display and adjustment screen.
- Automatic software verification
- Waterproof
- Small screen
- Deformation sensor
- Vibration resistant
Delivery includes:
- Electric case
- sensor
- Universal selector rod to be cut (if the bike does not have an original upshift)
Note that it is necessary to connect the harnesses to the ignition coils and not the injectors.
It will also be necessary to provide the appropriate rod for the selector.
For all accelerators of non-electronic origins, there is a universal model which will also adapt to it.
This product is comptable with:
| DUCATI | PANIGALE V4 | 2018 => 2019 |
- Download : SGRACE_BLIP_DUCATI_PANIGALE_FR_V
| Reference | SGRACE_BLIP_PAN_V4_sUP |
| Manufacturer | IRC |
